top of page

Winter Roofing in Western North Carolina: Why Installation Temperature Matters

Writer: Bryson Lanier (Owner)
Bryson Lanier (Owner)
Oct 13
4 min read

Updated: Oct 14

Just Because a Roof Can Be Installed in Winter, Doesn't Mean it Should Be.

As winter approaches in Western North Carolina, roofing work tends to slow down. And there’s a good reason for that.


Our mountain climate brings freezing temperatures, frost, snow, high winds, and unpredictable weather. While these conditions don’t necessarily prevent all roofing work, they can create serious challenges when installing asphalt shingles.

At Little Bird Roof Company, we believe a roof should be installed when conditions are right for the materials being used, not simply when a contractor has an opening in their schedule.


We regularly see roofing crews installing asphalt shingles during freezing temperatures, sometimes with snow still on the ground. While cold-weather installation is possible when proper manufacturer procedures are followed, rushing through these projects without taking the necessary precautions can create problems that homeowners won’t discover until months later.

Here’s what every Western North Carolina homeowner should know before scheduling a winter roof replacement.


What Temperature Is Too Cold to Install Asphalt Shingles?


Most major asphalt shingle manufacturers identify temperatures around 40°F to 50°F as a range where additional installation precautions become especially important.

The exact requirements depend on the manufacturer, the specific roofing product, and the conditions at the jobsite.


What Do Roofing Manufacturers Recommend?

Leading roofing manufacturers, including CertainTeed, GAF, Owens Corning, and IKO, provide specific guidance for installing asphalt shingles in cold weather.

CertainTeed

CertainTeed, the manufacturer of our preferred Landmark Pro architectural shingles, provides cold-weather installation guidance addressing shingle flexibility, sealing, and handling.


Cold temperatures can make asphalt shingles more brittle and delay the activation of factory-applied adhesive strips. Depending on the product and conditions, additional hand-sealing precautions may be necessary.

Installers should always follow the current instructions for the specific CertainTeed roofing system being installed.

GAF

GAF generally recommends installing asphalt shingles at temperatures of 40°F or above. Installation below that temperature may be possible with additional precautions, including hand-sealing where required.

Owens Corning

Owens Corning provides additional cold-weather handling and sealing instructions, particularly when temperatures fall below 40°F.

IKO

IKO warns that asphalt shingles become increasingly brittle around 50°F and below. Low temperatures can also delay adhesive activation, leaving newly installed shingles more vulnerable to wind damage until properly sealed.


These recommendations aren’t arbitrary. They’re based on how asphalt roofing materials behave in colder temperatures.

At Little Bird, we believe premium roofing materials deserve premium installation practices.

We’re proud to install CertainTeed roofing systems, including Landmark Pro, and we take manufacturer installation requirements seriously. A premium roofing product is only as good as the installation behind it.


1.

Asphalt Shingles Become Brittle in Cold Weather

As temperatures drop, asphalt shingles lose flexibility


A shingle that bends easily on a warm afternoon may crack when handled, nailed, or bent over a ridge on a freezing morning.


This creates several potential problems:

-Cracking during installation

-Damage around improperly driven fasteners

-Broken corners and edges

-Difficulty getting shingles to lie flat

-Damage when forming ridge caps and other roof details


Some of this damage may not be immediately obvious from the ground.

A roof can look perfectly fine when the crew leaves, yet contain cracked or stressed shingles that may cause problems down the road.

------------------------------------------------------------------------------------------------------------------------

2.

Single Adhesive Strips May Not Seal Properly
This is one of the biggest concerns with winter asphalt roof installations

Most modern asphalt shingles have factory-applied thermal adhesive strips designed to bond overlapping shingles together when exposed to sufficient warmth and sunlight. That bond is an important part of the roof’s resistance to wind. During cold weather, those adhesive strips may not activate for weeks or longer, depending on temperatures, sunlight, roof orientation, and other conditions.


Until the shingles are properly sealed, they can be more vulnerable to wind uplift and blow-offs.


Manufacturers address this problem through specific hand-sealing procedures using approved roofing cement. Unfortunately, simply nailing shingles onto a roof during freezing weather and assuming they’ll eventually seal is not always an acceptable installation method.


The installation crew must understand and follow the requirements for the exact product being installed.

------------------------------------------------------------------------------------------------------------------------

3.

Winter Winds Can Turn Poor Installation into Expensive Repairs

Western North Carolina homeowners are familiar with strong mountain winds, particularly during winter storms and changing weather systems.

Now imagine a roof that was installed during freezing temperatures, with shingles that never properly bonded together. A strong gust can lift unsealed shingle edges, potentially causing creasing, tearing, or complete shingle loss.


Once shingles are damaged or displaced, the roof becomes more vulnerable to wind-driven rain and water intrusion. This is one reason we believe proper installation conditions are just as important as the quality of the shingles themselves.

Even a premium roofing product can perform poorly when installed incorrectly.

------------------------------------------------------------------------------------------------------------------------

4.

Snow, Frost, and Moisture Create Additional Risks

Cold temperatures aren’t the only concern.

A roof deck covered in frost, snow, ice, or moisture creates both installation and safety challenges. Roofing materials and underlayments have their own application requirements, including minimum temperatures and acceptable substrate conditions.


Self-adhered ice and water barriers, for example, may require special primers, surface preparation, or minimum application temperatures to bond correctly. Installing materials over an improperly prepared surface can interfere with adhesion and compromise the roofing system.


A responsible contractor should evaluate the entire roofing assembly, not just whether the shingles can be nailed down that day.

------------------------------------------------------------------------------------------------------------------------


At Little Bird Roof Company, we believe the right roofing decision comes down to more than just materials. Timing and proper installation matter, too. With experience across a wide range of roofing systems, we can help you determine whether your roof needs immediate attention, a few preventative repairs, or can safely wait until spring. We’d rather help you make an informed decision than rush a replacement in less-than-ideal conditions.


If you're concerned about your roof heading into winter, contact Little Bird Roof Company for a free, no-obligation roof assessment. Proudly serving Asheville and communities throughout Western North Carolina.


Schedule your free inspection today!

828-678-BIRD


 
 
 

Comments


bottom of page